Apple LED Cinema Display Apple, the Apple logo, Apple Cinema Display, iChat, iMovie, iPhone, iPod, iSight, Mac, MacBook, MagSafe, and Photo Booth are trademarks of Apple Inc., registered in the U.S. and other countries. Apple Store is a service mark of Apple Inc., registered in the U.S. and other countries. ENERGY STAR® is a U.S. registered trademark. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple is under license. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. Apple Inc. © 2010 Apple Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the "keyboard" Apple logo (OptionShift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple 1 Infinite Loop Cupertino, CA 95014 408-996-1010 www.apple.com Getting Started Setting Up Your Display Using Your Display Care and Safety Ergonomics Troubleshooting Your Display Learning More, Service, and Support Specifications 5 6 8 12 14 15 16 17 19 20 22 26 28 29 30 31 Regulatory Compliance Information 32 Apple and the Environment 33 3 Getting Started YourAppleLEDCinemaDisplayisdesignedtoworkseamlessly withMaccomputersthathaveaMiniDisplayPortconnector. ItfeaturesanLED-backlitwidescreendisplay,aMagSafe connectortochargeyourMacBookcomputer,abuilt-iniSight camera,amicrophone,andaspeakersystem. The instructions on the following pages help you set up and use your new display. Learn how to:  Connect your display to your computer  Use your display's camera, microphone, speaker system, and USB ports  Adjust your display's settings Note: You can connect your Apple LED Cinema Display to a Mac desktop computer that has a Mini DisplayPort. Important: Carefully read all the installation instructions (and the safety information starting on page 12) before you set up and use your display. For information about the specific computers and graphics cards that are compatible with your display, go to www.apple.com/displays. 5 English SettingUpYourDisplay Follow these steps to set up your Apple LED Cinema Display: 1 Remove the protective film from the display and cables. 2 Insert the power cord into the display, and then insert the AC plug into a grounded power outlet. 3 Plug the MagSafe connector into the MagSafe power port on your MacBook to charge the battery and provide power to your computer. Apple LED Cinema Display MacBook Grounded power outlet Mini DisplayPort MagSafe USB 4 Connect the USB cable to your computer to use the display's built-in iSight camera, microphone, speaker system, and USB ports. 5 Connect the Mini DisplayPort cable to your computer. 6 Press the power (®) button on your computer to start it up. The display turns on automatically when you start up your computer. English 6 Setting Up Your MacBook with the Lid Closed You can close the lid of your MacBook and use just your Apple LED Cinema Display. Follow the setup instructions on the previous page and make sure the MagSafe connector from the display is plugged into the MagSafe power port on your MacBook. To use your Apple LED Cinema Display with your MacBook lid closed: 1 Connect an external USB keyboard and mouse to a USB port on your display, or use the Bluetooth® Setup Assistant to set up a wireless keyboard and mouse. 2 Make sure your MacBook is turned on. 3 Close the lid on your MacBook to put it to sleep. 4 Wait a few seconds, and then press any key on the external keyboard or click the mouse to wake your MacBook. 7 English UsingYourDisplay Your Apple LED Cinema Display has a built-in iSight camera, microphone, and speaker system. The USB connection between the display and your computer is required for these features. Microphone Built-in iSight camera Speaker system Using the Built-in iSight Camera and Microphone You can use the built-in iSight camera and microphone to capture still images, video, and sound using applications such as iChat, iMovie, and Photo Booth. To set up the camera and microphone with iChat: 1 Click the iChat icon in the Dock to open the iChat application. 2 Choose iChat > Preferences, and then click Audio/Video. 3 Choose Display iSight from the Camera pop-up menu. 4 Choose Display Audio from the Microphone pop-up menu. English 8 Setting Up Sound Input and Output You can listen to music, movies, games, and multimedia files through the speaker system on your display. You can use the microphone to record sounds, or talk with friends using iChat. Use Sound preferences to manage sound input and output. To set up sound input: 1 Choose Apple () > System Preferences, and then click Sound. 2 Click the Input tab in Sound preferences. 3 Choose Display Audio to input sound through your display's microphone. To set up sound output: 1 Choose Apple () > System Preferences, and then click Sound. 2 Click the Output tab in Sound preferences. 3 Choose Display Audio to hear sound through your display's speaker system. If your Mac computer supports sound output through the Mini DisplayPort in addition to the USB port, you can choose either Mini DisplayPort or USB Audio for audio output. These sound settings are used whenever your computer is connected to your display. They remain in effect until you change them. 9 English Setting Up Your Apple LED Cinema Display as an Additional Display When you leave the lid on your MacBook open, you can mirror the same desktop image on both displays or use the additional display as an extension of your desktop. Use Displays preferences to set up video mirroring or extended desktop. To set up video mirroring or extended desktop: 1 Choose Apple () > System Preferences, and then click Displays. 2 Click the Arrangement tab and follow the onscreen instructions. Adjusting the Resolution, Brightness, and Color Your Apple LED Cinema Display can automatically adjust the screen brightness for current light conditions using the built-in ambient light sensor. You can turn autobrightness on or off in Displays preferences. To change the resolution or brightness: 1 Choose Apple () > System Preferences, and then click Displays. 2 Choose a resolution or drag the Brightness slider. You can also use the brightness keys on an external Apple Keyboard to increase ( ) or decrease ( ) the brightness of your display. To change the display color profile or calibrate your display: 1 Click the Color tab in Displays preferences. 2 Choose a display color profile, or click Calibrate to open the Display Calibrator Assistant. For more information about calibrating your display, choose Help > Mac Help in the menu bar and search for "calibrate." English 10 Using the USB Ports and Security Slot Your Apple LED Cinema Display has three powered USB ports on the back. Use these ports to connect a mouse, keyboard, iPhone, iPod, or other USB peripheral. Important: You can use these USB ports to charge your iPhone or iPod, even when your display isn't connected to a computer. If you use one of these ports to sync information between your computer and an iPhone or iPod, make sure the display's USB cable is connected to your computer. USB ports Security slot To secure your display, attach a locking cable to the security slot. 11 English Using a VESA Mounting Solution with Your Display You can attach your display to an alternative mounting solution, using the VESA Mount Adapter Kit available from the Apple Online Store at www.apple.com/store. Use the kit to attach your display to any available VESA-compatible mounting solution. Simply follow the instructions included with the kit. CareandSafety Before you lift or reposition your display, you may need to disconnect the cables and power cord. Use correct lifting techniques when positioning the display. When lifting or carrying the display, hold it by the edges. Don't lift the display by the stand or the cord. To clean the screen on your display: 1 Disconnect the power cord. 2 Use the cloth that came with your display, or another soft, dry cloth, to wipe dust from the screen. WARNING: Don't clean the screen with a cleaner containing alcohol or acetone. Use a cleaner intended for use with a screen or display. Never spray cleaner directly on the screen. It may drip inside the display and cause damage. English 12 Don't operate your display in areas with significant amounts of airborne dust, or smoke from cigarettes, cigars, ashtrays, stoves, or fireplaces, or near an ultrasonic humidifier using unfiltered tap water. Tiny airborne particles produced by smoking, cooking, burning, or using an ultrasonic humidifier with unfiltered water may, in rare instances, enter the ventilation openings of your display and, under certain conditions, result in a slight haze on the inside surface of the glass panel that covers the display. Follow these safety guidelines for using your display:  The only way to completely disconnect power is to unplug the power cord. Be sure to pull the plug, not the cord.  Disconnect power immediately if the power cord is frayed or damaged, if you spill something on the display, or if the display falls or is damaged in some other way. WARNING: Use only the power cord that came with your display. The power cord has a three-wire grounding plug (a plug that has a third grounding pin) that fits only a grounded AC outlet. If you are unable to insert the plug into an outlet because the outlet is not grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet. WARNING: Your display is a high-voltage component and should not be opened for any reason, even when it's unplugged. If your display needs service, see "Learning More, Service, and Support" on page 16. 13 English Ergonomics Here are some guidelines for adjusting your display to reduce glare and to accommodate your physical size and shape.  Arrange the display so that the top of the screen is slightly below your eye level when you're sitting at the keyboard. The best distance from your eyes to the screen is up to you, although most people tend to prefer 18 to 28 inches (45 to 70 cm).  Position the display by tilting it up or down to minimize glare and reflections from overhead lights and nearby windows. Shoulders relaxed Forearms and hands in a straight line Forearms level or tilted slightly Lower back supported Thighs tilted slightly 18­28 in. (45­70 cm) Top of the screen at or slightly below eye level (You may need to adjust the height of your display by raising or lowering your work surface) Screen positioned to avoid reflected glare Clearance under work surface Feet flat on the floor or on a footrest For more information about health, safety, and maintenance, go to the Apple ergonomic website at www.apple.com/about/ergonomics. English 14 TroubleshootingYourDisplay Before performing any of these steps, make sure your computer is turned on, the display is plugged into an outlet, all the cables are connected properly to your computer and display, and your computer is not in sleep mode. If the screen doesn't have an image:  Check the cables and connectors again to make sure they are connected properly to your computer and the display.  Make sure your computer is turned on and is not in sleep mode. If the lid on your MacBook is closed, use the external keyboard or mouse to wake the MacBook from sleep.  Unplug the display's power cord from the grounded power outlet, wait a few minutes, then plug it in again.  Reset the PRAM by restarting your computer while holding down the Command (x), Option, P, and R keys until you hear the startup sound a second time. If the screen is dim:  Make sure the display brightness is set properly. Choose Apple () > System Preferences and click Displays. Drag the Brightness slider to adjust the brightness.  If the colors on the display are too saturated or not correct, you may need to calibrate your display. Open Displays preferences, click the Color tab, click Calibrate, and follow the instructions. If your MacBook isn't charging: Make sure the MagSafe connector from your display is seated properly in the MagSafe power port on your MacBook. 15 English If the built-in iSight camera, microphone, speaker system, or USB ports on the display aren't working: Make sure the USB cable from the display is firmly plugged ...